Presentation

Feasures

DLSC-F series for indoor use is real-time temperature monitoring system integrating visible light, infrared thermal imaging and embedded processing technology. The system can automatically inspect the running substation equipment, real-time monitoring, automatic warning, real-time access to the thermal information of the equipment fault status, and automatically generate a corresponding temperature changing report. With features such as uninterrupted power, long distance, safety and reliability, and high detection accuracy, it is one of the most effective means to realize on-line monitoring and equipment status maintenance.


◆ Front-end temperature measurement technology

◆ Full real-time image transfer without delay

◆ Illumination free, smoke and water penetration monitoring

◆ Fast and accurate temperature measurement with good uniformity

◆ Infrared image compression and network transmission

◆ World leading substation equipment intelligent identification system

◆ Automatic cruise

◆ Various types of security, events, equipment and other management functions

◆ Automatic report generation function

◆ Fully compatible with IEC61850 protocol

◆ Easy system integration


Infrared  panorama  (Part of the image below) 

Infrared  panorama  (Part of the image below)

Infrared  panorama  (Part of the image below)


Specification

Item

DLSC-F337

DLSC-F642

Detector

Type

Uncooled FPA

Resolution

384*288

640*480

Imaging
     Performance

FOV/Min Focal Length

12°×9°/0.5m

15°×11°/1m

Spatial Resolution

0.67mrad

0.41mrad

NETD

≤0.06℃@30℃

Frame Rate

50/60Hz

Focus

Manual / Automatic    Electrical Focus

Spectral Range

8~14μm

Visible camera

Zoom

20 /30 Optical Zoom

Resolution

1080P

Min Illumination

0.005(Lux)

PTZ

Horizontal rotation angle

0°~360°Continuous    rotation

Preset Position

MAX 255, Angle Feedback    Support

Mounting & Pitching Angle   

Top Mounting, -90°~+90°

Measurement

Range

-20℃~+650℃

Accuracy

±2℃ or ±2% of reading    (whichever is greater)

Correction

Manual / Automatic

Mode

Free Setting in    Software

Storage

Raw Image

Raw images real-time    transfer via client control software, the images are analyzable and    measureable

Storage Format

H.264 real-time    recording

Single Frame Image capture    in JPG format

Power

External Power

220AC

Power Consumption

≤75W(25℃ nominal)

Environment

Operating Temp

-40℃~+65℃

Protection Class

IP54

Humidity

≤90% (Non-condensing)

Automatic identification management

Automatically identify    the heat map acquired by the system, and identify valid target of the heat    map through image registration to ensure the efficiency of temperature    detection.

Anti-false alarm identification System

All temperature    measurements are based on valid target recognition. According to the    inspection strategy, measure only marked devices, and automatically eliminate    disruptive heat source, effectively preventing false alarms.

Detailed equipment work status management

Establish a management    system for all equipment and components, during automatic cruising, perform    temperature analysis and record of all equipment components within the scope    of inspection of the infrared camera, specific to detailed equipment failure    location.

Automatic cruise

Preset PTZs can be    used to set up more than 128 regular check positions, provide multiple modes    of auto-cruise programs, realizing fully automatic operation, equipment    working status inspection several times a day, automatic warnings, automatic    report output. Reduce the number of on-site visits, and improving the    efficiency of operators.

Automatic warning

During system    cruising, it will automatically alarm if abnormal temperature are found on    the target device, the alarm information includes text messages and sound    messages, informing the operator for specific information of the alarm    location, in order to track the fault point, confirm the alarm condition and    eliminate the fault.

Automatically generate reports

System software can    automatically generate device temperature analysis report for a single frame    of infrared image, or comprehensive report. The system can automatically    record the temperature value of each temperature measurement, and generate a    temperature report to reflect the temp changes of the contact point in a    certain period of time.

Infrared panorama

Provides wide field of    view, high accuracy, 360 degree full view infrared image

Front-end temperature measurement method

Front-end temperature    measurement, directly output the temperature data without computer processing,    and the temperature signal is directly superimposed on the video signal

Dual-field surveillance, assisted identification

The infrared camera    and the high-magnification visible light camera are mounted on the same head,     not only ensure that the two cameras    monitor the same position, but also solve the problem that the infrared    thermal image is difficult to identify device installation position, convenient    for instantly checking of the hot spots of equipment

Low network bandwidth

Supports low-bandwidth    operation mode, occupy bandwidth less than 0.8M under the condition of    guaranteeing transmission of temperature data and image data at the same time.

Development kit

Instrument real-time    control development kit

Image Processing    Development Kit

Infrared image    transformation equipment intelligent identification development kit

Client Remote Control    Development Kit

Client Web Remote    Control Development Kit

Development Support Response

Instant response,    24-hour on-site support, full Chinese support

Universal protocol support

Direct support for    IEC60870-5-104 protocol
     Direct support for    IEC61850 protocol

Technical specifications are for reference only.

Online Consultation

Message

CAPTCHA

Can't see clearly
Video list

SOCIAL

Email Subscription

© 2018 DALI Technology 浙ICP备11030830号      SiteMap

Contrast Bar

Hide

Contrast|Unfold|Close
  RSS BACK
您的信息已提交成功,我们会尽快与您联系!
Your information has been submitted successfully, we will contact you as soon as possible!